Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis 525-701-12 Mitutoyo
Out of stock

Formtracer Extreme SV-C4500CNC S [mm] X=200mm; Z2=300mm; Y-axis 525-701-12 Mitutoyo
  • Rating:
    0 reviews
  • Manufacturer:
    Mitutoyo
  • Model:
    525-701-12
  • SKU:
    SV-C4500CNC-S
  • Available:
    In stock
  • Model:
    SV-C4500CNC-S
  • Accuracy:
    Contour detector: X= (0,8 +4L/2000) μm [ L: Drive length (mm)] Contour Z1= (0,8 + 12H/1000) μm [ H: Measurement height from the horizontal position (mm)] Z2=(3,5 + 15H/1000) μm
  • Drive speed:
    CNC mode: max. 200 mm/s Joystick mode: 0-50 mm/s
  • Inch-Metric:
    Metric
  • Inclining range:
    -45° (CCW) to +10° (CW) (for models equipped with with α - axis)
  • Measuring force:
    0.75 mN
  • Measuring range:
    Z2= [S] 300 mm / [H] 500
  • Measuring speed:
    0.02 - 2.0 mm/s
  • Software:
    FORMTRACEPAK Allows control of all axis, motor-driven Y-axis table and rotary table for efficient automated measurement. Contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. An inspection certificate can be created by setting the print format as required.
  • Y-axis table unit:
    Installed
  • Z2-axis range [mm]:
    300
  • α-axis unit:
    -

Description

High accurate fully CNC surface and contour measuring instrument.

The Formtracer Extreme SV-C4500CNC offers you the following benefits:

  • Powerful as two separate, fully CNC instruments.
  • Measurement of long distances in Z2-axis for models without α- axis.
  • Each axis has a drive speed up to 200 mm/s.
  • Dual stylus system for upward and downward contour measurement at doubled sided contours.
  • It´s variable contour measuring force is controlled by software FORMTRACEPAK.
  • The contour drive unit is equipped with an arc encoder detector giving excellent accuracy and resolution in Z1-axis.
  • Perfectly made for increased throughput of multiple profile and workpiece measurement tasks.
  • The detector unit incorporates an anti-collision safety device, causing it to stop automatically if its main body collides with a workpiece or jig.

Reviews (0)

Write a review

Вы смотрели

Formtracer Avant FTA - W8 H3000-E [mm] X=200mm; Z2=500mm; wide granite
Out of stock

Formtracer Avant FTA - W8 H3000-E [mm] X=200mm; Z2=500mm; wide granite

SKU:FTA - W8 H3000-E
CRYSTA-Apex V574 Range 500x700x400mm with Anti-vibration stand
Out of stock

CRYSTA-Apex V574 Range 500x700x400mm with Anti-vibration stand

SKU:CRYSTA-Apex V574