Surftest Extreme SV-3000CNC S [mm] X=200mm; Z2=300mm; Y-axis & α 178-509-12 Mitutoyo
Out of stock

Surftest Extreme SV-3000CNC S [mm] X=200mm; Z2=300mm; Y-axis & α 178-509-12 Mitutoyo
  • Rating:
    0 reviews
  • Manufacturer:
    Mitutoyo
  • Model:
    178-509-12
  • SKU:
    SV-3000CNC-H
  • Available:
    In stock
  • Model:
    SV-3000CNC-H
  • Base material:
    Granite
  • Drive speed:
    200 mm/s (max. CNC) 0-60 mm/s (joystick)
  • Granite base size (WxD) [mm]:
    800 x 620
  • Inch-Metric:
    Metric
  • Inclining range:
    -45° (CCW) to +10° (CW)
  • Measuring speed:
    0.02 - 2.0 mm/s
  • Optional accessories:
    Other optional and standard accessories are listed later in different sections for accessories and styli.
  • Profiles:
    Primary Profile (P), Roughness Profile (R), Waviness (W), MOTIF (R, W) and more
  • Range:
    800 µm; 80 µm; 8 µm (up to 2.4 mm with an optional stylus)
  • Resolution:
    0.05 µm
  • Scale:
    Reflective-type linear encoder
  • Software:
    FORMTRACEPAK Allows control of all axis, motor-driven Y-axis table and optional rotary table for efficient automated measurement. Surface roughness analysis and contour evaluation can be performed using analysis of level differences, angle, pitch, area and contour tolerancing as standard. An inspection certificate can be created by setting the print format as required.
  • Standard:
    EN ISO, VDA, JIS, ANSI and customize setting
  • Traverse:
    X = 200 mm Y = 200 mm
  • Traverse straightness:
    0.5 µm / 220 mm
  • Y-axis table unit:
    Installed

Description

These is a fully CNC surface roughness measuring instrument with powerful software
FORMTRACEPAK.

The Surftest Extreme SV-3000CNC offers you the following benefits:
  • It is perfectly made for increased throughput of multiple profile and workpiece measurement tasks.
  • Each axis has a drive speed of up to 200 mm/s.
  • You can take continuous measurement over horizontal and inclined surfaces by power-tilting the drive unit.
  • Within the measuring range of the styli software FORMTRACEPAK supports contour calculation features.
  • 3D topography measurement as option available.
  • Inclined plane measurement is possible through 2-axis simultaneous control in the X and Y
    directions.
  • The detector unit incorporates an anti-collision safety device, causing it to automatically stop if its main body collides with a workpiece or jig.
  • All models equipped with Y-axis.
  • Z-axis tracking measurement for models without α-axis.

Reviews (0)

Write a review