Surftest Extreme SV-3000CNC S [mm] X=200mm; Z2=300mm; Y-axis 178-508-12 Mitutoyo
Out of stock

Surftest Extreme SV-3000CNC S [mm] X=200mm; Z2=300mm; Y-axis 178-508-12 Mitutoyo
  • Rating:
    0 reviews
  • Manufacturer:
    Mitutoyo
  • Model:
    178-508-12
  • SKU:
    SV-3000CNC-S
  • Available:
    In stock
  • Model:
    SV-3000CNC-S
  • Base material:
    Granite
  • Drive speed:
    200 mm/s (max. CNC) 0-60 mm/s (joystick)
  • Granite base size (WxD) [mm]:
    800 x 620
  • Inch-Metric:
    Metric
  • Inclining range:
    -45° (CCW) to +10° (CW)
  • Measuring speed:
    0.02 - 2.0 mm/s
  • Optional accessories:
    Other optional and standard accessories are listed later in different sections for accessories and styli.
  • Profiles:
    Primary Profile (P), Roughness Profile (R), Waviness (W), MOTIF (R, W) and more
  • Range:
    800 µm; 80 µm; 8 µm (up to 2.4 mm with an optional stylus)
  • Resolution:
    0.05 µm
  • Scale:
    Reflective-type linear encoder
  • Software:
    FORMTRACEPAK
  • Standard:
    EN ISO, VDA, JIS, ANSI and customize setting
  • Traverse:
    X = 200 mm Y = 200 mm
  • Traverse straightness:
    0.5 µm / 220 mm
  • Y-axis table unit:
    Installed

Description

These is a fully CNC surface roughness measuring instrument with powerful software
FORMTRACEPAK.

The Surftest Extreme SV-3000CNC offers you the following benefits:
  • It is perfectly made for increased throughput of multiple profile and workpiece measurement tasks.
  • Each axis has a drive speed of up to 200 mm/s.
  • You can take continuous measurement over horizontal and inclined surfaces by power-tilting the drive unit.
  • Within the measuring range of the styli software FORMTRACEPAK supports contour calculation features.
  • 3D topography measurement as option available.
  • Inclined plane measurement is possible through 2-axis simultaneous control in the X and Y
    directions.
  • The detector unit incorporates an anti-collision safety device, causing it to automatically stop if its main body collides with a workpiece or jig.
  • All models equipped with Y-axis.
  • Z-axis tracking measurement for models without α-axis.

Reviews (0)

Write a review

Вы смотрели

Formtracer Avant FTA - H4 S3000-D [mm] X=100mm; Z2=500mm; 0,75mN; α
Out of stock

Formtracer Avant FTA - H4 S3000-D [mm] X=100mm; Z2=500mm; 0,75mN; α

SKU:FTA-H4 S3000-D
Formtracer Avant FTA - H4 D4000-D [mm] X=100mm; Z2=500mm; 0,75mN
Out of stock

Formtracer Avant FTA - H4 D4000-D [mm] X=100mm; Z2=500mm; 0,75mN

SKU:FTA-H4 D4000-D
ABS Digital Thickness Gauge with ID-S Inch/Metric, 0-0,47", 0,0005", 4,72" Throat

ABS Digital Thickness Gauge with ID-S Inch/Metric, 0-0,47", 0,0005", 4,72" Throat

456.00€
Add to Cart