QV-X302P1C-E QV Apex 302 Pro - Colour LED 363-602-10 Mitutoyo
Out of stock

QV-X302P1C-E QV Apex 302 Pro - Colour LED 363-602-10 Mitutoyo
  • Rating:
    0 reviews
  • Manufacturer:
    Mitutoyo
  • Model:
    363-602-10
  • SKU:
    QV-X302P1C-E
  • Available:
    In stock
  • Model:
    QV Apex 302 Pro - Colour LED
  • Common to vision displacement sensor (X×Y×Z):
    234 x 200 x 200
  • Illumination unit:
    Contour illumination: White LED Vertical surface illumination: Color LED PRL: Color LED
  • Main unit mass (Including the special sub-base):
    355
  • Max. stage loading:
    20.0 kg
  • Measuring range (X×Y×Z):
    300 x 200 x 200 mm
  • Observation unit:
    Programmable power turret 1X-2X-6X
  • QVTP Pro model:
    QVT1-X302P1C-E
  • Resolution of scale:
    0.1
  • Thermal compensation function:
    Manual
  • Vision measuring accuracy:
    EUX,MPE/EUY,MPE = (1,5+3L/1000) µm EUZ,MPE = (1,5+4L/1000) µm EUXY,MPE = (2+4L/1000) µm L: arbitrary measuring length (unit: mm)

Description

QV APEX Pro
CNC Vision Measuring System

All the QUICK VISION Pro models are equipped with a strobe light, and the newly developed vision measuring function "StrobeSnap" delivers measurements with both high throughput and high accuracy. Regardless of the continuity of measuring positions, measuring time can be shortened by about 35 to 45% for most measurement samples when compared with our former system.

The STREAM function provides an amazingly high throughput, due to the non-stop measurement where the camera motion and the strobe light are synchronized. It can shorten measuring time more than StrobeSnap due to the continuous element measurement as shown in the following conceptual image of measurement.

  • This is a superior model of QUICK VISION, which is equipped with the StrobeSnap function as standard, enabling high-speed measurement.
  • We offer a model with Tracking Auto Focus (TAF) that quickly focuses on the object improving throughput significantly.
  • The camera motion and the strobe light are synchronized to make non-stop vision measurements without stopping the stage. This makes it possible to use STREAM to shorten measuring time dramatically.

Touch Trigger Probe
CNC Vision Measuring System equipped with optional touch trigger probe.

  • Non-contact measurement and contact measurement can be done solely by one unit. QVTP Pro can perform contact measurement by using the vision measuring function and the touch-trigger probe.
  • Three-dimensional workpiece measurements can be performed. Enables 3D measurement of workpieces such as press-molded products, plastic-molded products, and cut products, which until now could not be measured with image processing alone.
  • Using the probe module change rack allows switching between vision measurement and touch-trigger probe measurement during an automatic measuring sequence.

Reviews (0)

Write a review