Leeb hardness testing HH-411 Series, no batteries included, ASTM 810-298-21 Mitutoyo

Leeb hardness testing HH-411 Series, no batteries included, ASTM 810-298-21 Mitutoyo
  • Rating:
    0 reviews
  • Manufacturer:
    Mitutoyo
  • Model:
    810-298-21
  • SKU:
    HH-411
  • Available:
    In stock
  • Model:
    HH-411
  • Accuracy:
    ±12 HL (800 HL +/- 1.5%)
  • Connector cable for:
    HH-411
  • Data output:
    RS-232C, SPC
  • Dimensions Measuring/Display unit:
    ø28 x 175 mm / 70 x 110 x 35 mm
  • Display unit:
    7-segment LCD
  • DP-1VA (264-505):
    965013
  • Functions:
    Auto angle compensation, Offset, OK/NG judgement, Hardness scale conversion, Data storage (1800 data entries), Statistical analysis (Average value, Max. value, Min. value, Dispersion), Auto sleep function, Impact counter display function
  • Hardness Display range:
    Leeb hardness: 1 to 999HL
  • Impact device:
    Impact hammer with integrated carbide-ball tip, D scale (ASTM A 956)
  • IT-016U 264-016-10 Hardmatic table:
    937387
  • Mass:
    320 g
  • PIN:
    Round 6
  • Power supply:
    Battery LR6 (2 pcs.) or AC adapter (optional)
  • Specimen requirements:
    Min. specimen thickness of 5mm or more and mass of 5kg or more (However, a specimen of mass of 0.1 to 5kg is measurable by securing to a massive base) Testing point: 5mm or more from edge of specimen, 3mm or more between testing points Specimen surface roughness: Ra of 2µm or less
  • Specimen Thickness Specimen Mass:
    Min. 5 mm 5 kg or more
  • U-WAVE-T:
    02AZD790E
  • USB-ITN:
    06AFM380E
  • Vickers Brinell Rockwell C Rockwell B Shore Tensile strength:
    Conversion range / Increment 43-950HV / 1 HV 20-894 HB / 1 HB 19.3-68.2 HRC / 0.1 HRC 13.5-101.7 HRB / 0.1 HRB 13.2-99.3 HS / 0.1 HS 499-1,996 MPa / 1 MPa
3,200.00€
In stock

Description

  • The “HARDMATIC” HH–411 is a light-weight portable hardness testing instrument for metal workpieces.
  • It works on the rebound hardness principle (standardized according to ASTM A 956).
  • Measurement is conducted with hardness value L (Leeb-value), however, conversion to any desired hardness scale can be performed.
  • In addition the display automatically shows OK/NG with the tolerance function set and selected.
  • Memory function for 1800 measured values.
  • Automatic measuring direction angle-compensation of the given angle.

Reviews (0)

Write a review