Digital Indicator, Signal ID-C 12,7mm, 0,001mm, Lug Back Plate 543-350-10 Mitutoyo

Digital Indicator, Signal ID-C 12,7mm, 0,001mm, Lug Back Plate 543-350-10 Mitutoyo
  • Rating:
    0 reviews
  • Manufacturer:
    Mitutoyo
  • Model:
    543-350-10
  • SKU:
    ID-C112JX2
  • Available:
    In stock
  • Model:
    ID-C112JX2
  • ABS / INC (INC ZERO):
    Yes
  • Alarm:
    Low voltage, ABS composition error, overflow error, setting error
  • Analog bar resolution switchable:
    Yes
  • Calculation function (with formula):
    Yes
  • Contact point:
    Carbide ball, thread: M2.5x0.45
  • Counting direction switchable:
    Yes
  • Delivered:
    With signal cable 4 m. One end is fixed to the main unit. No connector is supplied for the other end.
  • Digimatic data output:
    Yes
  • Digital Scale:
    Electrostatic capacitance type absolute linear encoder
  • Digital step:
    0.001 mm/0.01 mm
  • Digital/Analog:
    Digital
  • Display:
    LCD, character height 8 mm
  • Function lock:
    Yes
  • GO/±NG judgement:
    Yes
  • GO/±NG judgement via LED:
    Yes
  • H MPE (Hysteresis):
    0.002 mm
  • Inch-Metric:
    Metric
  • Inch/Metric switchable:
    No
  • Mass:
    295
  • Max. Permissible Error E MPE (Total Range):
    0.003 mm
  • Max. response speed:
    Unlimited
  • MAX/MIN/RANGE:
    Yes
  • Measurement frequency (MAX/MIN/RANGE):
    Standard mode: 100 times/s (plunger speed max. 0.1mm/s for peak measurement)
  • Measuring force MPL:
    ≤2.5 N
  • ON/OFF:
    Yes
  • Power supply:
    1 battery CR2032
  • PRESET 3x:
    Yes
  • Protection:
    IP54
  • R MPE (Repeatability):
    0.002 mm
  • Range:
    12.7
  • Signal input: No-voltage input, (PRESET_RECALL/ZERO:
    Yes
  • Signal output: (+NG, OK, -NG):
    Yes
  • Stem ∅:
    8 mm
  • Type:
    EN ISO Standard
871.00€
In stock

Description

This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output.

  • Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54)
  • Measures MAX/MIN/RANGE (run-out value).
  • Saves three different Preset and Tolerance settings.
  • Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE)
  • Calculation function Ax. Coefficient A freely definable, x = displacement of the plunger
  • Analogue bar graph in the display (12 different scales switchable)
  • GO/±NG tolerance judgment function

Reviews (0)

Write a review