Digital Indicator Peak Hold, ANSI / AGD Inch/Metric, 0,5", 0,00005", Lug Back 543-302 Mitutoyo

Rating:

0 reviews
Manufacturer:
Mitutoyo
Model:
543-302
Available:
In stock11
ABS / INC (INC ZERO):
Yes
ABS/INC switchable:
Yes
Alarm:
Low voltage, ABS composition error, overflow error, setting error
Analog bar resolution switchable:
Yes
Battery life:
Standard mode: approx. 1 year fast mode: approx. 4.5 month
Calculation function (with formula):
Yes
Contact point:
Carbide ball, thread: No.4-48UNF
Counting direction switchable:
Yes
DATA/HOLD:
Yes
Delivered:
Including CR2032 battery, certificate of inspection
Digimatic data output:
Yes
Digital Scale:
Electrostatic capacitance type absolute linear encoder
Digital step:
0.00005"/0.0001"/0.0005"/0.001 mm/0.01 mm
Digital step switchable:
Yes
Digital/Analog:
Digital
Display:
LCD, character height 8 mm, 330° rotatable
Fast measurement mode:
Yes
Function lock:
Yes
GO/±NG judgement:
Yes
H MPE (Hysteresis):
0.0001"/0.002 mm
Inch-Metric:
Inch/Metric
Inch/Metric switchable:
Yes
Low voltage alarm:
Yes
Mass:
170
Max. Permissible Error E MPE (Total Range):
±0.0001"/0.003 mm
Max. response speed:
Unlimited
MAX/MIN/RANGE:
Yes
Measurement frequency (MAX/MIN/RANGE):
Standard mode: 10 times/s fast mode: 50 times/s (plunger speed max. 50 µm/s for peak measurement)
Measuring force:
≤ 1,5
Measuring force MPL:
≤1.5 N
ON/OFF:
Yes
Power supply:
1 battery CR2032
PRESET 3x:
Yes
Protection:
IP42
R MPE (Repeatability):
0.0001"/0.002 mm
Range:
0.5"/12.7 mm
Stem ∅:
9.52 mm
Type:
ASME/ANSI/AGD Standard

Price: 523.00€

In stock

Quantity:

This indicator is the MAX/MIN/RANGE value holding function model

It offers the following benefits:

The MAX/MIN/RANGE (run-out value) can be measured.
A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably.
Easy indicator setup via a setup menu.
Analogue bar graph in the display (12 different scales switchable).
GO/±NG tolerance judgement function.
This indicator enables the use of a calculation function for the measured value Ax.
Coefficient A is freely definable and x = displacement of the plunger.
A USB interface box can be used to set up the indicator from PC via dedicated software.